Brackish Water RO Membrane Element BW 4040HF, Commercial Reverse Osmosis RO
BW-4040HF 2400 GPD Commercial RO Membrane. Reverse Osmosis membrane elements for commercial drinking water systems are the industry’s most reliable method of water filtration. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. Our membranes are rated at 60 psi and will purify about 20% more water than competitive elements rated at 60 psi. We suggest changing your membrane every 2 years. 2400 Gallon Per Day Membrane for Commercial Reverse Osmosis systems. Certified to ISO 9001 Standards. Removes particles down to 1/10,000th of a micron removing 98% of impurities including organic, inorganic contaminates, chemicals, ETC. Provides stable, high rejection of contaminates even with high TDS water sources. Advanced membrane technology with innovative thin layer composite membrane design. More consistent performance with less fouling requiring less frequent cleaning and changeouts. 100% dry-stored membrane maximizing shelf life. The first full tank of permeate should be discarded, DO NOT use this initial permeate for drinking water or food preparation as it may contain carbon fines and manufacturing by-products. Keep membrane moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. The membrane shows some resistance to short-term contact with chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. It is applicable to the desalination of surface water, groundwater and water treatment with salt concentration between 2000 and 8000ppm. It can be widely used in the medicine, chemical industry, beverage, electricity and other various industries etc. Active Membrane Area ft. Permeate Flow GPD(T/D). Stable Rejection Rate (%). Concentration of Solution (NaCl). Operating Pressure psi(MPa). Notes: The permeate flow of single membrane element may vary with in ±15%. Operating Limits and Conditions of Membrane Element. 600 psi(4.14MPa). Free Chlorine Concentration of Feed Water. PH Range of Feed Water During Continuous Operation. PH Range of Feed Water During Chemical Cleaning. Pressure Drop of Single Membrane Element. BW-4040 Reverse Osmosis Membranes for many Applications such as. Whole House Reverse Osmosis. Commonly referred to as: Extra Low Pressure, Extra Low Energy, Ultra Low Pressure, or Ultra Low Energy. 4″ x 40″ Fits nearly all standard 4″ x 40″ Membrane housings stainless steel, PVC, or Fiberglass.