Tag Archives: pressure

Commercial Extreme Low Pressure RO Membrane Element-XLP-4040 2300GPD

Commercial-Extreme-Low-Pressure-RO-Membrane-Element-XLP-4040-2300GPD-01-vdoo Commercial Extreme Low Pressure RO Membrane Element-XLP-4040 2300GPD
Commercial Extreme Low Pressure RO Membrane Element-XLP-4040 2300GPD
Commercial Extreme Low Pressure RO Membrane Element-XLP-4040 2300GPD

Commercial Extreme Low Pressure RO Membrane Element-XLP-4040 2300GPD
Keensen XLP-4040 2300 GPD Commercial RO Membrane. Reverse Osmosis membrane elements for commercial drinking water systems are the industry’s most reliable method of water filtration. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. Our ISO9001 rated membranes are rated at 60 psi and will purify about 20% more water than competitive elements rated at 60 psi. We suggest changing your membrane every 2 years. 2300 Gallon Per Day Membrane for Commercial Reverse Osmosis systems. Certified to ISO 9001 Standards. Removes particles down to 1/10,000th of a micron removing 98% of impurities including organic, inorganic contaminates, chemicals, ETC. Provides stable, high rejection of contaminates even with high TDS water sources. Advanced membrane technology with innovative thin layer composite membrane design. More consistent performance with less fouling requiring less frequent cleaning and change outs. 100% dry-stored membrane maximizing shelf life. The first full tank of permeate should be discarded, DO NOT use this initial permeate for drinking water or food preparation as it may contain carbon fines and manufacturing by-products. Keep membrane moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. The membrane shows some resistance to short-term contact with chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. It is applicable to the desalination of municipal water, groundwater with salt concentration less than 1000ppm. It can be widely used in pure water preparation and related industries. Active Membrane Area ft. Permeate Flow GPD(T/D). Stable Rejection Rate (%). Concentration of Solution (NaCl). Operating Pressure psi(MPa). Notes: The permeate flow of single membrane element may vary with in ±15%. Operating Limits and Conditions of Membrane Element. 600 psi(4.14MPa). Free Chlorine Concentration of FeedWater. PHRange of FeedWaterDuring Continuous Operation. PHRange of FeedWaterDuring Chemical Cleaning. Pressure Drop of Single Membrane Element. XLP-4040 Reverse Osmosis Membranes for many Applications such as. Whole House Reverse Osmosis. Commonly referred to as: Extra Low Pressure, Extra Low Energy, Ultra Low Pressure, or Ultra Low Energy. 4″ x 40″ Fits nearly all standard 4″ x 40″ Membrane housings stainless steel, PVC, or Fiberglass. This is compatible with the following common Brands and part numbers as well as others. Dow Filmtec 4040 – Low pressure lines XLP, XLE. Axeon HF4 and HF5 Series. This is not a Brackish water membrane. It is designed to work best in water that is under 2500 ppm TDS. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters”. The seller is “reverse.osmosis” and is located in this country: US. This item can be shipped worldwide.
  • Model: 104303
  • Type: Membrane
  • Compatible Model: Max Water
  • Color: White
  • MPN: 104303
  • UPC: 680392203298
  • Brand: MaxWater

Commercial Extreme Low Pressure RO Membrane Element-XLP-4040 2300GPD

RO 14G LARGE CLEAN WATER Pressure Storage Tank Container RESERVOIR PAE TK-1070

RO-14G-LARGE-CLEAN-WATER-Pressure-Storage-Tank-Container-RESERVOIR-PAE-TK-1070-01-kcqe RO 14G LARGE CLEAN WATER Pressure Storage Tank Container RESERVOIR PAE TK-1070

RO 14G LARGE CLEAN WATER Pressure Storage Tank Container RESERVOIR PAE TK-1070
10-14 Gallon Pressure Tank for Drinking Water or Aquarium Use, fits all RO systems and RO+DI systems. (Note: Outside volume is 14 gallon and internally it holds about 10 gallons of water under input pressure of 60 psi). NOTE: The tank is big, it will not fit under the sink. Dimension of the tank : 15.25″ diameter and the height is 23″ with stand, 3/4″ MPT (w/adapter to 1/4″) inlet connection. Add a tank for easy top-off. For example, if your fish tank and the RO+DI unit is far apart where direct connection is not available, you can add a tank to your RO+DI unit. It takes about 4 to 5 hours to fill up the tank, then you can take the tank and connect it to the sump of your fish tank. Also connect a float valve (FV-14 or FV-15) to the setup. So as the water evaporates, the water level drops, then the float valve opens up, then the water from the pressure tank supplies the water, and then the float valve closes. After 7 gallons of water in the tank is depleted, you need to refill it again. Even if you have a direct connection between the RO+DI unit and your fish tank, adding a tank to the setup would reduce the unnecessary turning on/off of your RO+DI unit. For Drinking: (larger volume usage for restaurant, coffee shops, food processing). If your tank is loosing capacity, and it is not able to be recharged. Or if it is dirty, then you can consider replacing a new tank. Replace larger tanks to triple the amount of water you can dispense at one time. Connect to icemaker or refrigerator. Since the tank may be too big to put under the sink, you may need to put it in the basement, garage, or other locations. A pressure tank is used in RO systems to accumulate water and provide pressure when dispensing the purified water. It has a water bladder inside the tank that holds the purified water, and outside the bladder it contains compressed air. So when you dispense water, the compressed air squeezes the bladder and forces the water out with pressure. You can also connect several tanks together to provide more water. Dimension: 15.25″ diameter, 23″ height with stand, 3/4″ MPT (w/adapter to 1/4″) inlet connection. Material: Outside is steel, inside is a FDA approved food grade bladder. Stainless steel connection on top. Purified water only comes in contact with bladder and the stainless steel connector on top. Plastic tank ball valve, connects to 1/4″ tubing or (if you want 3/8″ connection please specify). Plastic reducer to reduce from 3/4″ to 1/4″. Pre-charged at 5 to 7 psi air pressure. The item “RO 14G LARGE CLEAN WATER Pressure Storage Tank Container RESERVOIR PAE TK-1070″ is in sale since Thursday, September 22, 2011. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters”. The seller is “filterdirect” and is located in Santa Ana, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation.
  • Model: RO-1070
  • Custom Bundle: Yes
  • Compatible Brand: ALL
  • Type: PRESSURIZED WATER STORAGE TANK
  • Compatible Model: ALL
  • Color: White
  • MPN: Does Not Apply
  • Brand: PA-E
  • Suitable For: Commercial

RO 14G LARGE CLEAN WATER Pressure Storage Tank Container RESERVOIR PAE TK-1070