SimPure T1-400 GPD 8 Stage UV Reverse Osmosis Tankless RO Water Filter System
The SimPure T1-400 GPD 8 Stage UV Reverse Osmosis Tankless RO Water Filter System is a powerful and efficient water filtration solution suitable for both commercial and household use. It features 8 filtration stages and a built-in booster pump for optimal water production efficiency of 0.28gal/min (400gal/day). Other impressive features include UVC sterilization with a 99.999% removal rate, tankless design for space-saving installation, and a pressure gauge that reminds you when it’s time to change the filters. With a 95%+ TDS removal rate and the ability to reduce even TDS to zero, this water filter system ensures that your water is clean, pure, and safe to drink. UV+RO 8-Stage Tankless Reverse Osmosis System. The SimPure ROULP-3012-400-T1 has been verified and tested by SGS and meets the NSF/ANSI 58 Standard. This ensures its exceptional quality and performance. It can convert your tap water into pure and healthy drinking water by removing 99.99% of the 1,000+ contaminants including viruses, bacteria, chemicals (PFOA/PFOS, Pharmaceuticals), heavy metals (Lead, Arsenicetc), chlorine, TDS (fluoride, nitrates/nitrites) and etc. 95%+ TDS Removal Rate. SimPure high-efficiency RO Filter removes contaminants 0.0001 microns or greater in diamete. This tankless ro water filter system is equipped with SimPure special reverse osmosis membrane, so the TDS Removal Rate can reach up to 95%+. If the TDS of your tap water is between 0-200ppm, the filtered water will be close to 0ppm. If the TDS is between 200-500ppm, the filtered water will be below 25ppm. Use no chemicals and emits absolutely no by-products, effectively destroying 99.999% of microorganisms, bacteria, germs more thorough sterilization from your water. SimPure UV purification system combined with 4-Larger Stages RO Filtration System, can make water purification to another level. 400 GPD & 1.5:1 Pure to Drain Ratio. T1-400UV offers faster flow-400 gallons per day with lower waste 1.5:1 pure to drain ratio, which will save your water bills. Great for household and light commercial in Restaurants, Salons, Labs, and Offices all benefit in their ways from high-quality RO water. RO System With Booster Pump. With a booster pump, you will never worry for low water pressure, it will easily booster your water pressure to the optimal level and run the RO system more efficiently, producing the purified water fater. Meanwhile, saving at least 50% more waste water than a traditional RO system without a booster pump. SimPure T1-400UV adopts tankless design, which can save up to 70% of your under sink space. It will be much easier and more convenient to install, ready to use within 30 minutes. Also you can get rid of the water tank, avoid the secondary pollution. It supplies you 24/7 fast and stable flow purified water, never need to wait. Pre-Membrane Water Pressure Gauge. The pre-membrane pressure gauge can remind you when to replace the filters, which is more scientific than timing. The value is normal for 100PSI. If value exceed 130PSI, the RO filter need to be replaced. If it lower than 100PSI, the PP and CTO filter need to be replaced. You can refer to the data of pressure gauge to judge when to replace and which filters need to replace. Care your health in a more precise way. SERVING USA SINCE 2006. Seattle, WA USA, SimPure dedicated in providing world-class quality of water filtration solutions. Please contact our trained water specialists. And is available to answer any questions during the life of the product.