New Commercial White

48V 6KW Growatt SPF 6000T DVM Low Frequency Split Phase 120V & 240VAC. Low Frequency models offering up to 3+ x Power surge capacity (18kW for 20MS) Ideal for starting power tools, well pumps, welders etc, this can do it all! We have had a lot of sales on mobile business converting their mobile workshops to solar, and using this puppy to run their entire shop on wheels. (carpenters, welders, especially) No need to run that noisy generator, plaster the roof with solar panels, and run them on 48V nissan Leaf modules. Provides split phase out the box (not parallel able) – you’re maxed out at 6Kw which is a ton of power considering the surge capability. Not Grid Tied, but does have grid assist (transfer switch). Because it has an output transformer. You can pull the full 6KW load from the 120V Output or the 240V Output. (which is not the case on the High Frequency models). NOT parallelable – 6KW only (12KW model available on our site, see manual links below , as well as use your ingenuity to find us). Quick Specs (see Image in listing for more details). 6kW Nominal Output (120V or 240V combined loads). 18kW Surge Output for 20ms. Power Factor 1.0. Solar Max Charging 80A at 48V, (5000W Max solar array), Mppt range 60 to 145VDC (Max 150Voc). Utility Charging Max 50A at 48V (40 to 58VDC). Built in transfer switch (switches load to Generator / Utility of battery voltage is too low – and charges at the same time). Dimensions, 23 x 17 x 9 inches, 105 lbs. I think this will be able to solve many high startup current applications, well pumps, etc. Some more technical reading.. Whole (small) house power module, all in one. There is nothing quite like it on the market. Supplies a massive 50A output at 120V , 25A at 240V. USA Breaker Box compatible, L1 – N – L2 (120 – 0 – 120V). Whole house power at 6kW. A massive 18kW surge capability. Wifi Module – Growatt Shine Link for your Iphone / Android available in our store. Grid Assist Feature bypasses the inverter in case of overload or programmable UPS function, or low battery. 60A Utility/Generator Battery charger (60A x 48V = 2800W at 240V Utility supply). Generator Dry contact start output. Generator / Utility needs to supply 240V to charge the battery. 80A (5kW) Solar MPPT Charge controller (60 to 115Vmp). Number of panels you can connect = 5000W / [your panel wattage] – example 5000 /345W = 16 panels , 5000 / 240W = 22 (21) panels etc. If your Solar panels’ Vmp (Voltage at maximum power – the lower of the two numbers on your panel spec) (Not Voc) voltage is between 38.3 V and 57.5V, you can connect 2 in series with matching parallel strings to add up to the number of panels as in formula above. 16 x 40V panels would be connected in 2s8p. If your Vmp is between 28.75V and 38.3V you can connect 3 in series with matching series strings connected in parallel to add up to the number of panels as in formula above. Example: 21 x 35V panels would be connected in 3s7p. If your Vmp is between 17V and 28.75V, then 4 in series with matching series strings connected in parallel to add up to the number of panels as in formula above. Example 48 x 20V panels(maybe 100W) would be in 4s12p (48 panels). AC Breaker Recommendation (double pole 240V) 8AWG, 80A (Input & Output). PV Input DC breaker (8AWG)= Total Solar Panel Watts / Solar Panel Array Voltage x 1.25 (example 16 x 300W)(37Vmp) Solar Panels = 4800W of Solar connected in 2s configuration gives 37V x 2 = 74V, 4800 / 74 = 64A, 64A x 1.25 (25% more) = 80A. Battery , 6000W / 48V = 125A x 1.25 = 150A DC Breaker to battery bank. (2 x 3 AWG). Battery recommended to be no less than 250Ah (12kWH, can be Lead Acid, AGM, LifePO4, Li-Ion etc any battery between 40 to 60V DC). Battery is required to operate! There is no maximum battery size recommendation (Ah). User manual can be downloaded at. Guide to programmable parameters (page 12). The generator charger is a different beast to the solar charger. (Does not utilize the Bulk and Float Charge settings) It works on a float valve type principle. (triggers when battery voltage drops below that on setting 12 – set the voltage higher than current battery voltage to start charging right away) Stops charging from Generator when setting 13′ s voltage is reached Will not start charging the battery again until it drops below battery voltage – in setting 12. Setting 01 set to SBU to activate setting 12 and 13. Note, setting Setting 11 too high for your generator may cause your generator to falter at startup, and cause the Inverter Charger to lose synchronization with the Generator (58 to 63Hz), if in doubt start small, and work your way up. The item “Special! 48V 6KW Growatt 6000T DVM Low Freq Split Phase 120/240VAC, 5KW 80A MPPT” is in sale since Friday, May 8, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “watts247″ and is located in Mount Pleasant, Utah. This item can be shipped to United States.

• Brand: Growatt
• Voltage Input: 48V
• Model: SPF 6000 T DVM
• Type: Charger/Inverter
• Protection Properties: Low Voltage Protection
• Power Source: Solar
• Recommended Environment: Indoor
• Current Output: 50A
• Current Type: AC/DC
• System Configuration: Off-Grid
• Voltage: 100-199 VAC
• Maximum Input Voltage: 121-140 V
• UPC: Does not apply
• Inverter Technology: Battery-Based
• Power: Greater Than 2000 W
• Voltage Output: 120V / 240Vac
• Country/Region of Manufacture: China
• Charging Mode: MPPT (Maximum Power Point Tracking)
• Features: LCD Display
• Color: White
• Custom Bundle: Yes
• Application: Agriculture/Farming
• Wattage: 6000
• MPN: SPF 6000 T DVM
• Current Rating: 41-50 A